Yamaha 25B Owner's Manual page 88

N
ON
OFF
EMU00247
PROCEDURE FOR REMOTE
CONTROL MODEL
4) Place the remote control lever in the
Neutral position.
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in Neu-
tral.
701015
5) Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then, install the lock plate on
the other end of the lanyard in the
engine stop switch.
w
8 Attach the engine stop switch lanyard
to a secure place on your clothing, your
arm or leg while operating.
000293
8 Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing from functioning.
8 Avoid accidentally pulling the lanyard
during
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly. This
could cause people and objects in the
boat to be thrown forward.
6) Turn the main switch to "ON".
000977
3-15
normal operation.
GB
Loss of