Table of Contents
Advertisement
EARPHONE JACK
Plug in earphone (not included). Sound is heard from
both sides in monaural.
CELL PHONE Crank Charging
Because cell phone batteries vary in their current ratings,
we cannot specify charging rates or usage time. 10 to 15
minutes of cranking may result in 1 or more minutes of
talk-time.
1. Set Power/Volume control to OFF position.
2. Select CELL with the slide switch.
3. Plug the cell phone charging cord into the USB phone
charge socket.
4. Plug other end of your USB socket into the cell phone's
charging socket.
5. Rotate the dynamo crank about 2 turns per second.
NOTE:
When charging a cell phone via the USB cell phone
charger, it is important to turn the crank at least 2
revolutions per second, or until you see the green LED
above the crank handle turn on. This is an indication that
the phone is receiving enough power from the radio.
Continue to crank at this rate until you are satisfied that
an appropriate level of charge has been received by your
cell phone. If you decide to stop cranking for whatever
reason, please wait at least 5 seconds before beginning
to crank again. Not following these instructions may
cause damage to your cell phone.
8
CELL
Advertisement
Table of Contents
