Intellitouch Plus Touch Technology
When connected to Windows 7 computers, the touchmonitor can report two
simultaneous touches. The IntelliTouch Plus touchscreen can be re-calibrated to your
displayed video image, if needed, through the Calibration function in the Elo driver
control panel.
The IntelliTouch Plus driver will only support multiple monitor if they are all using the
IntelliTouch Plus touchscreen technology.
To use multiple IntelliTouch Plus monitors, plug in monitors to calibrate, double-click
on the EloConfig desktop shortcut to run Elo Touchscreen Configuration screen.
Click on "Calibrate Touch Screens..." to calibrate multiple monitors.
User Manual: 1915L
SW600066 Rev G, Page 21 of 35