Vido.at AU-G65-SC18 User Manual page 9

6.OSD - System Setting
System Setting
SYSTEM SETTING
In system setting menu, you can modify operation and
EDIT DOME LABEL
display setting, such as dome label, temperature and
INITIAL INFO
display of various value on the operational screen.
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
Dome Label:
EDIT DOME LABEL
1. use UP or DOWN to change the charactor.
2. use RIGHT to move to next char.
：
LABEL ENTRANCE
3. use RIGHT to move to last char and save.
BACK
4. use Left to first char and cancel.
EXIT
Initial information:
I N I T I A L I N F O
Shows the information about current setting.
SPEED DOME V1.00
PROTOCOL：FACTORY
DOME ADDRESS：001
COMM：4800,N,8,1
BACK
EXIT
Display setup
DISPLAY SETUP
Actuvate the display for the on-screen info in
operaton mode.
DOME LABEL OFF
PRESET LABEL OFF
Dome label:
ZOOM LABEL ON
ZONE LABEL OFF Preset label:
DIRECTION LABEL ON
Zoom label:
LABEL OFF
TEMPRATURE
Zone label:
BACK
Direction label:
EXIT
Temperature label:
shows the cur. temp in the speed dome
13
Some products may not be available in your country, please contact our distributor for more details
the name of dome
shows the labe of every preset
shows zoom factor on screen
shows the zone name
shows the coordinates
6.OSD - Motion, Clear
Motion control
MOTI ON
AUTO FLIP
AUTO FLIP ON
180°
PROPORTION PAN ON
PARK TIME 005
PROPORTIONAL PAN:
PARK ACTION SCAN
the dome will adjust the pan and tilt speed
POWER UP ACTION AUTO
automatically for comfortable viewing.
BACK
PARK TIME:
EXIT
custom defined action( park action).The range is
from 1 to 240 minutes. This function can be
deactivated by setting the minute to 0.
PARK ACTION:
the idle time (park time). Selectable between Preset,
Scan, Pattern (Nr), Tour or None.
POWER UP ACTION:
be started after power up and self test. Selectable
between Auto,Preset 1, Scan, Pattern (Nr), Tour or
None. By selecting Auto, the dome will resume the
last action before power off.
Clear
C LE AR
You can clear setting's memory or reset the
camear to factory default. The follwing functions
are supported:
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
- Clear Zones
CLEAR ALL TOURS
- Clear all presets
CLEAR ALL WINDOWS
FACTORY DEFAULTS
- Clear all patterns
RESTART
BACK - Clear all tours
EXIT
- Clear all windows
- Factory defaults
Warning: The clear action can not be
PASSWORD SETUP
undone. once a item is cleared it is
impossible to retrieve the deleted setting.
O LD PASSWORD : ******
Please make sure that the requested clear
NEW PASSWORD : ******
action is desired.
CONF PASSWORD : ******
ENABLE PASSWORD OFF
BACK
Password setup
EXIT
You can change password to access the OSD menu.
Default Password is 000000.
CLOCK SETTING
Clock setting
TIME ´00:00:00
Some function like Auto-Tracking require the timer for
DATE 01/01/01
activation.
DAY MON
Time:
BACK
EXIT
DATE:
DAY:
Some products may not be available in your country, please contact our distributor for more details
: Auto. Image flip in tilt range from 90° to
depends on the zoom factor,
defines the idle time prior to start a
the action which will be started after
defines the action which will
HH:MM:SS
YY/MM/DD
MON-SUN
14