Related Manuals for Vido.at AU-G35M-SB18
Summary of Contents for Vido.at AU-G35M-SB18
- Page 1 AU-G35M Mobile PTZ Camera Series USER'S MANUAL v 1.0 Preliminary www.vido-europe.com...
-
Page 2: Table Of Contents
WARNING CONTENTS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN 1. Precaution............1 OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR 2. Features............2 OTHER OPENINGS ON THE EQUIPMENT. 3. -
Page 3: Precaution
1.PRECAUTION 2.FEATURES Refer all work related to the installaion of this product to qualified service The G35M mobile PTZ camera series designed for vehicle and outdoor video personnel or system installers. surveillance application. The integrated, motorized pan-tilt mechanic allows user to point the camera to any position( 360°... -
Page 4: Packing List
3.PACKING LIST 4.INSTALLATION Safety Instructions before starting G35M - Do not install and operate this appliance in a flammable and explosive environment. - Make sure that the installation is done according to the local electricity safety regulation AU-G35M of your country. USER'S MANUAL - Before installation and mentainence, make sure that the appliance is disconnected from the power source. -
Page 5: Installation
4.INSTALLATION 4.INSTALLATION Connector description Using optional accessories The G35M series can be connected to various optional accessories through the The wiring cable of G35M series provides connectors for power supply, video and I/O standard connector types, which simplifiy the cable handling and avoids possible interface mistakes. - Page 6 4.INSTALLATION 4.INSTALLATION RS-485Termination The values are for reference only. Cable standard Max. Distance (m /ft ) Devices using Rs485 control are usually connected in daisy-chain. which reqiuers Depends on the cable quality and termination with 120 Ω resistor on both ends. Following picture illustrates the RG 59 /U 229m / 750 ft environmental condition, the...
-
Page 7: Operation
4.INSTALLATION 5.OPERATING THE SPEED DOME Initial Screen After powering up, the camera will enter the Open the chassis of PTZ FIRMWARE V1.0 self-test mode and display the status screen( Protocol: VIDO B02 camera with wrench. as in the picture left).It contains information Dome Address: 001 about the model and current settings. -
Page 8: Osd
OSD - MAP OSD Menu The G35M Series are equipped with new OSD-Menu function. All operation functions and camera related settings can be changed or modified here. In order to use the OSD function, a telemetric controller device, such as Keyboard, DVR or other devices with similiar function is necessarily required. - Page 9 6.OSD - System Setting 6.OSD - Motion, Clear Motion control System Setting MOTION SYSTEM SETTING EDIT DOME LABEL AUTO FLIP : Auto. Image flip in tilt range from 90° to AUTO FLIP In system setting menu, you can modify operation and INITIAL INFO PROPORTION PAN 180°...
- Page 10 OSD - Camera Setting OSD - Preset, Scan Function setting Camera setting F U N C T I O N S E T T I N G C A M E R A S E T T I N G In camera setting menu, you can setup camera module In function setting menu, you can define and activate ZOOM SPEED...
- Page 11 6.OSD - Patterns, Tours 6.OSD - Zones and Privacy Mask Pattern Zone Z O N E S PATTERNS Pattern records the user’s operation steps on You can define the zones in the whole PT range up performing PTZ control and stores as a track. The ZONES NUMBER up to 8 zones with individual label.
- Page 12 6.OSD - Alarm Setting 7. Dome Address & Protocol Privacy Mask ( Window Blanking) W I N DOW BLANK I N G Protocol setting Privacy Mask is used to protect the privacy area not to be In order to establish a connection for WINDOW NUMBER displayed once the camera is pointed on, such asu telemetric control with keyboard device.
- Page 13 7. Address ID, 1 to 67 7.Address ID, 68 to 135...
- Page 14 7. Address ID, 136 to 203 7. Address ID, 204 to 255 Set to 255, for software configuration.
-
Page 15: Specifications
8. Specification Model AU-G35M-SC18 AU-G -SB18 AU-G -SB26 AU-G -SB36 AU-G -SB18WD AU-G65-SB26 AU-G -SB36WD AU-G -SB26WD with WDR with WDR with WDR Day / Night Day / Night Day / Night Signal Format PAL / NTSC Progressive Scanning Image Sensor 1/4 inch Ex-View CCD H. - Page 16 © 2009 VIDO Electronics vertriebs G.m.b.H. Vienna, Austria. All rights reserved. www.vido-europe.com...