Vido.at AU-G65-SC18 User Manual page 10

OSD - Camera Setting
Camera setting
C A M E R A S E T T I N G
In camera setting menu, you can setup camera module
ZOOM SPEED HIGH
related settings. please note that depends on module's
DIGITAL ZOOM ON
capability, some function may not available. please contact
BLC MODE OFF
your local sales representative for detailed information.
SLOW SHUTTER ON
LINE SYNC N/A
WDR MODE N/A
ZOOM SPEED:
ADVANCE SETTING 1
function.
ADVANCE SETTING 2
BACK
DIGITAL ZOOM:
EXIT
function of the camera module.
BLC MODE:
improves the image when an object has strong back light.
SLOW SHUTTER:
camera, which provides a higher light sensibility in low-
environment.
WDR: Activates the Wide Dynamic Range function, which
A D V A NC E S E T T I N G 1
improves the image contrast when an object has very strong
light on background. Only available with camera modules
IR CUTTER FILTER AUTO
with WDR.
IR CUT ON TIME N/A
IR CUT OFF TIME N/A
Advanced setting 1
MAX GAIN 28dB
BACK
IR CUT FILTER:
EXIT
Filter (IRC), also known as "DAY/NIGHT" mode. with the
removal of IRC, the camera turns into Black/White mode and
has higher sensibility to low-light or IR-Light in the night.
Selectable between On, Off, Auto or Time. Only available
on camera module with IRC function.
Max Gain:
Advanced setting 2
Under the advanced setting, you can make
A D V A NC E S E T T I N G 2
improvements to image quality due to different
environmental conditions.
AE MODE AUTO
AE MODE:
SHUTTER N/A
IRIS N/A condition in the surveillance area, you can set the AE in
BRIGHT N/A
different modes and adjust the parameters, such as
WB MODE AUTO
shutter speed, iris factor and brightness for the best
R GAIN N/A
image quality.
B GAIN N/A
HI-RESOLUTION OFF
BACK
WB MODE:
EXIT
based on DSP processing. you can also adjust the Red-
Gain or Blue-Gain to change the color tone.
ALC, PLC:
additional setting to WB function. only avialble with
15
dedicated camera modules.
Some products may not be available in your country, please contact our distributor for more details
defines the speed when performing zoom
Activate or deactivate the digital zoom
Select the Back Light Compensation mode,
Activates the Slow Shutter function of the
Enables the removal of Infrared Cutter
improve the image quality in the Night modus
Auto Exposure mode. Depends on the light
White balance mode, a image improvement
Average and Peak Level Control,
OSD - Preset, Scan
Function setting
FUNCTION SETTING
In function setting menu, you can define and activate
PRESETS
different PTZ funcitons, such as preset points, auto
SCAN
scan, tours and Pattern. Presets and tour functions
PATTERNS
can also be set or activated directly from keyboard
TOUR
device without OSD. Please refer to the keyboard's
ZONES
manual for operation details.
TIME RUNNING
AUTO-TRACKING
BACK
EXIT
PRESETS:
PRESET NUMBER:
P R E S E T S 128 presets. The number can be selected from 0 to
128.
P R E S E T N U M B E R 0 0 1
SET PRESET:
S E T P R E S E T
OSD by entering this menu item and move the PTZ.
S H O W P R E S E T
press IRIS-OPEN key on the keyboard to save. If the
C L E A R P R E S E T
preset is pointed within digital zoom, it will
E D I T P R E S E T L A B E L
automatically go back to max. optical zoom range in
BACK
order to provide the best image.
EXIT
SHOW PRESET:
CLEAR PRESET:
EDIT PRESET LABEL:
EDIT PRESET LABEL
can define a name which will be shon on the
operation screen once the preset is called. please
choose the preset number at first. The avaialbe
LABEL ：ROOM 1
characters are: 0-9, A-Z, <,>,. and space.
BACK
EXIT
SCAN
The SCAN function moves the PTZ between 2-
predefined points in constant speed.The
following parameters can be set:
SCAN
SCAN NUMBER:
SCAN NUMBER 01 scan.
SCAN SPEED 63
SCAN SPEED:
SET LEFT LIMIT
points.
SET RIGHT LIMIT
SET LEFT LIMIT:
CLEAR SCAN
RUN SCAN SET RIGHT LIMIT:
EDIT SCAN LABEL
CLEAR SCAN:
BACK
RUN SCAN:
EXIT
EDIT SCAN LABEL:
Some products may not be available in your country, please contact our distributor for more details
G65-70 Series supports up to
Defining the preset points directly in
Moves to current preset point
Clear the current preset
For the current preset, you
G65-70 Series supports up to 4
cruising speed between the
defines the left point.
defines the right point
Delete the scan setting
starting the scan function
set the name for the scan