Vido.at AU-G65-SC18 User Manual page 11

6.OSD - Patterns, Tours
Pattern
PATTERNS
Pattern records the user's operation steps on
performing PTZ control and stores as a track.
PATTERN NUMBER 1 The G65 and G70 Series can record up to 4
PROGRAM PATTERN
tracks with max. 180 sec. each.
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
PATTERN NUMBER:
BACK
from 1 to 4
EXIT
PROGRAM PATTERN:
pattern when selected. you can perfome PTZ
movement for recording and shall not exceed 180
sec. Press IRIS-OPEN to save the track.
RUN PATTERN:
CLEAR PATTERN:
EDIT PATTERN LABEL :
current pattern.
Tour
EDIT TOUR
Tour is an auto-run through selected preset
points with definable pause time. A tour can
TOUR DWELL 001
store up to 32 presets points.
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
TOUR DWELL:
00-00-00-00-00-00-00-00
the preset points. selectable between 000-
RUN TOUR
255(s).
BACK
EXIT
TOUR PRESETS:
keyboard device to enter the preset point
selection. Move the joystick with up and down
to select the preset points by number and save
the setting with IRIS-OPEN key. with IRIS-
CLOSE key you can move to the previous
selection. If a select point has the value 0, all
the following presets points will be ignored.
RUN TOUR:
menu.
17
Some products may not be available in your country, please contact our distributor for more details
Selects the pattern number,
Starts recording the
Starts the current pattern
Delete curretn pattern.
Sets the name for
pause time for every stop on
press IRIS-OPEN Key on the
Starts the tour and exit the OSD
6.OSD - Zones and Privacy Mask
Zone
Z ONE S
You can define the zones in the whole PT range up
ZONES NUMBER 1 to up to 8 zones
SET LEFT LIMIT display setting "Zone Label" is activated, the
SET RIGHT LIMIT
label will be displayed on the operation screen.
CLEAR ZONE
The definition of the zones should not be
EDIT ZONE LABEL
overlapped.
BACK
EXIT
ZONES NUMBER:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR ZONE:
EDIT ZONE LABEL :
zone.
Time Running
T IM E R UN N I N G
You can set up the timer to start a function like
preset, tour or pattern. Each day can be set 4
DAY SUN
action.
TIME CHANNEL 1
START TIME 00:00
END TIME 00:00
RUNNING NONE
BACK
EXIT
AUTO TRACKING
A UT O T RA C K I N G
Auto-Tracking can seach people or object with
high speed and low light performance.
DAY SUN
STATE ON
DAY:
START TIME 00:00
STATE:
END TIME 00:00
START TIME: set the time for activation
SENSITIVE LOW
END TIME: set the time for stop the tracking
TRACKING-ZOOM OFF
SENSITIVE: set the sensitivity for the detection
SET LEFT LIMIT
SET LIMIT: set the max. angle for the tracking.
SET RIGHT LIMT
BACK
Some products may not be available in your country, please contact our distributor for more details
with individual label. When the
Current zone selection
Left limit of the current zone
Right limit of the current zone
Delet the current zone
change the laben of current
set current day
activate AUTO-TRACKING on this day
18