Download Print this page

Kenwood FP670 series Instructions Manual page 10

Hide thumbs

Advertisement

Multi-Mill
The multi-mill attachment if supplied, can be used to blend baby food, make salad dressings, chop herbs and mill spices as well as milling
coffee beans.
1.
Remove the outlet cover from the food processor by lifting off.
2.
Place the jar, rim uppermost on the worktop and add the food to be milled
3.
Ensure that the rubber seal is correctly located in the recess of the blade and housing assembly.
4.
Invert the blade and housing assembly, and place so that the blades are submerged in the jar.
5.
Secure the assembly by screwing the base onto the jar until finger tight.
6.
Place the multi mill on the outlet, engaging the lugs in the base in the slots provided. Turn clockwise until it locks into position (fig.20).
Note:- When using the multi mill ensure that there are no tools in the processor bowl. The multi mill will only operate with the processor bowl
and lid in position.
Hints:-
For best results do not fill the glass jar more than half full with ingredients to be blended.
Blend small quantities of cooked ingredients together with a little gravy or milk to make baby food.
Best results are obtained using a high speed.
When milling herbs, best results are obtained when the herbs are clean and dry.
IMPORTANT
You can ensure the long life of your Multi Mill by switching off promptly as soon as the desired fineness has been reached.
Maximum continuous operation for any process must not exceed 2 minutes.
Do not leave your Multi Mill unattended whilst in operation.
When milling dried ginger, it should be broken into pieces before milling, whilst Turmeric is extremely hard and considered unsuitable for
milling.
WARNING
NEVER PLACE THE BASE AND BLADE ASSEMBLY ONTO THE APPLIANCE WITHOUT THE JAR IN POSITION, NOR DISMANTLE
BEFORE REMOVING THE COMPLETE MULTI MILL FROM THE PROCESSOR. UNDER NO CIRCUMSTANCES MUST THE MULTI MILL
JAR BE USED IN CONJUNCTION WITH THE LIQUIDISER BASE A989, A990, A993, A996
YOUR MULTI MILL IS UNSUITABLE FOR PROCESSING HOT LIQUIDS.
Maximum Operating Capacities for Your Food Processor
Shortcrust Pastry up to a flour weight of
Yeast dough up to a flour weight of
Cake mix ingredients totalling not more than
Chopping meat
Liquid capacity - bowl with maxi-blend canopy
Liquidiser
Paddle egg whisk
Twin beater geared whisk
10
Base with fixed spring
Blade and housing assembly
Rubber seal
Blend and store jar
Max fill line
Lid
20
12oz/340g
1lb 2oz/500g
3lb/1.36Kg
12oz/340g
2.25pt/1.3litre
1.75pt/1litre
6 egg whites
4 egg whites

Hide quick links:

Advertisement

loading

  Also See for Kenwood FP670 series

This manual is also suitable for:

Fp370 seriesFp470 seriesFp570 seriesFp450 series