Black & Decker LDX116 Instruction Manual page 3

16v max & 20v max
Hide thumbs Also See for LDX116:
Table of Contents

Advertisement

Available languages

Available languages

e) Do not overreach.
Keep proper footing
and balance at all times.
This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewelry.
Keep your hair, clothing
and gloves away from moving
parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) if devices
are provided for the connection of dust extraction and collection
facilities,
ensure these are connected
and properly used. Use of dust collection
can reduce dust-related
hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect
the plug from the power source and/or the battery pack from the
power tool before making any adjustments,
changing
accessories,
or storing
power tools.
Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons
unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding
of moving
parts,
breakage
of parts and any other condition
that may affect the power tool's
operation.
If damaged,
have the power tool repaired
before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting
tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits, etc. in accordance
with these
instructions, taking
into account
the working conditions
and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger
specified
by the manufacturer.
A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack:
b) Use power tools only with specifically designated
battery
packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery
pack is not in use, keep it away from other metal objects
like
paper clips, coins, keys, nails, screws,
or other small metal objects
that can
make a connection
from one terminal
to another.
Shorting the battery terminals
together may cause bums or a fire.
d) Under abusive
conditions,
liquid may be ejected from the battery, avoid
contact, if contact accidentally
occurs, flush with water, if liquid contacts
eyes, additionally
seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
6) SERVICE
a) Have your power tool serviced
by a qualified
repair person
using only identical
replacement
parts. This will ensure that the safety of the power toolis maintained.
Specific
Safety Rules
• Rold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and could give the operator an electric shock.
• Use auxiliary
handle(s)
if supplied
with the tool. Loss of control can cause personal
injury.
• Use clamps or another practical way to secure and support the work piece to a stable
platform. Holding the work by hand or against your body leaves it unstable and may lead to
loss of control.
• When not in use, place tool on its side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large battery packs will stand upright but may be
easily knocked over.
• Keep your hair, clothing,
and gloves away from air vents. Air vents often cover
moving parts in which these items can be caught.
. Hold tool firmly with two hands, one hand on the handle, and the other gripping the bottom
around the battery area. Use auxiliary handle if provided. Loss of control can cause personal
injury.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ldx120

Table of Contents