Table of Contents
Advertisement
5-2
1
2
3
4
5
Removing a SIMM
Follow this procedure should you need to remove the memory SIMM.
Turn the printer power OFF and unplug the printer power cord.
Disconnect all cables from the back of the printer.
Open the front cover and remove the image cartridge. Refer to
"Replacing the Image Cartridge" in section 4-2.
Push down on the tray and stacker extenders until both are
recessed into the printer body.
Turn the printer upside down, remove the screws where shown
below, and remove that half of the bottom panel.
Adding Memory • 51
Advertisement
Table of Contents
