Table of Contents
Advertisement
Problem
The paper is not fed
into the printer.
The printer prints
blank pages.
Half of the page is
blank.
36 • Chapter 3
Possible Cause
Paper has not been inserted
correctly.
There is too much paper in the
multipurpose paper feeder.
The image cartridge is not
installed properly.
The image cartridge is empty.
The page layout is too complex.
The page orientation setting may
be incorrect.
The physical paper size and the
size specified in your application
do not match.
The interface cable specifications
may be incorrect.
Remedy
Remove and reinsert the paper
correctly (refer to "Loading Print
Media" in section 2-2).
Remove some of the paper from
the multipurpose paper feeder.
Remove and reinsert the image
cartridge.
Replace the image cartridge
(refer to "Replacing the Image
Cartridge" in section 4-2).
Lower print resolution to 300 dpi.
Simplify the page layout and
remove any unnecessary
graphics from the document if
possible.
Install more memory (refer to
"Installing a SIMM" in section
5-1).
Change the page orientation in
the Printer Setup dialog box.
Insert the correct paper into the
printer or change the software
paper size settings.
Use the interface cable supplied
with the printer or replace the
cable with an IEEE 1284-
compliant cable.
Advertisement
Table of Contents
