Advertisement
unexpected situations.
Loose clothes, jewellery or long hair
can be caught in moving parts.
reduce dust-related hazards.
the job better and safer at the rate for which it was
designed.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
tools are dangerous in the hands of untrained users.
Many accidents are caused by poorly
maintained power tools.
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
will ensure that the safety of the power tool is maintained.
Use of dust collection can
The correct power tool will do
Power
Properly
This
@
Additional safety warnings for sanders
a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock
work by hand or against your body leaves it unstable and
may lead to loss of control.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
The following pictograms are shown on the tool:
:
must read the instruction manual.
#
This tool is double insulated; therefore no earth
wire is required. Always check that the power
supply corresponds to the voltage on the rating
plate.
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
4
Cutting accessory contacting
Holding the
To reduce the risk of injury, the user
Advertisement
