Intended use Remove adjusting keys and wrenches Your Black & Decker sander has been designed for sanding Always check that adjusting keys and wrenches are removed and polishing wood, metal, plastics and painted surfaces. from the tool before operating the tool. This tool is intended for consumer use only.
Electrical safety Additional safety instructions for Australia and New This tool is double insulated; therefore no earth wire Zealand is required. Always check that the power supply This appliance is not intended for use by young or infirm corresponds to the voltage on the rating plate. persons without supervision.
By using these accessories you will get the very attachment. best from your tool. Maintenance Profile attachment (KA161K only) (fig. E) The profile attachment is used for contour sanding. Your tool has been designed to operate over a long period of Remove the screw (8).
Voltage Power input W 55 No-load speed 11,000 EC declaration of conformity Black & Decker declares that these products, KA161/KA161K, conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN50144, EN55014, EN61000 (sound pressure): 66 dB(A), L (acoustic power) 79 dB(A), hand/arm weighted vibration < 2.5 m/s...