Intended use If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD) Your Black & Decker sander has been designed for sanding protected supply. Use of an RCD reduces the risk of wood, metal, plastics and painted surfaces. This tool is electric shock.
Page 5
d. Store idle power tools out of the reach of children - Dispose of dust particles and any other debris safely. and do not allow persons unfamiliar with the power This tool is not intended for use by persons (including ...
Page 6
Electrical safety Locate the front of the louvre attachment (7) onto the sanding base (4). This tool is double insulated; therefore no earth Secure it in position with the four screws supplied. wire is required. Always check that the power Place a 1/2 sheet to the underside of the louvre base.
Page 7
Your Black & Decker tool has been designed to operate over Internet at: www.2helpU.com. a long period of time with a minimum of maintenance. Technical data Continuous satisfactory operation depends upon proper tool KA400 TYPE 1 care and regular cleaning. Voltage Vac 230 Warning! Before performing any maintenance, switch off...
Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer KA400 unless: The product has been used for trade, professional or ...
Page 11
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.