Before getting started / Operation
©
Before getting started
©
Removing the battery fuse
Push the battery compartment lid
Pull the tab of the protective fi lm out of the battery
compartment.
Push the battery compartment lid
compartment until it clicks into place (Fig. A).
– When it is switched on, an internal alignment and a
self-test of the LC display are carried out.
– In order to check if all bars of the numbers are activated
correctly, please check the image of the display of
your appliance with the sample (Fig. B) when you
switch the appliance on.
©
Operation
©
Setting the date / time (Fig. C)
You only have to set the date and time when you operate
the appliance for the fi rst time and after you change the
battery.
1. Press and hold the "MEM / SET" button
two seconds in standard mode. An acoustic signal
will sound. The device is now in set-up mode.
2. Press the "MEM / SET" button
the 12-hour or 24-hour format.
downwards.
10
onto the battery
10
down for
1
to choose between
1
GB/CY
15