Outboard Motor; Flushing Device; Installing Top Cowling - Yamaha F225F Owner's Manual

Operation
1
1. Oil dipstick
2. Upper mark
3. Lower mark
EMU40412

Outboard motor

Check that the outboard motor is mounted

properly and check the outboard motor
mounting bolts for looseness.
Check the propeller for damage.

Check for engine oil leaks.

EMU40372

Flushing device

Check that the flushing device is securely
tightened on to the fitting on the bottom cowl-
ing. NOTICE: Make sure to connect the
garden hose connector to the fitting on
the bottom cowling and tighten it secure-
ly. Otherwise, cooling water will leak out
during operation, causing the engine to
overheat.
[ECM02292]
53
2
3
ZMU06918
1. Flushing device
2. Garden hose connector
3. Fitting
EMU40752

Installing top cowling

1. Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
1
2
1. Rubber seal
2. Bottom cowling
2 1
3
ZMU07158
ZMU07159