INSTRUMENT AND CONTROL FUNCTIONS
Fuel tank breather/overflow
hose
3
1. Fuel tank breather/overflow hose
2. Original position (paint mark)
Before operating the motorcycle:
G
Check the fuel tank breather/over-
flow hose connection.
G
Check the fuel tank breather/over-
flow hose for cracks or damage,
and replace it if damaged.
G
Make sure that the end of the fuel
tank breather/overflow hose is not
blocked, and clean it if necessary.
EAU39450
Catalytic converter
This vehicle is equipped with catalytic
converters in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.
CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
G
Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
G
Do not allow the engine to idle
too long.
3-18
EAU13441
Seats
Passenger seat
EWA10860
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
ECA10700
1. Passenger seat lock
2. Unlock.
2. Pull the passenger seat forward,
and then lift it up.
To install the passenger seat
1. Place the passenger seat in the
original position, and then push the
rear of the seat down to lock it in
place.
EAU39322