Rear Wheel - Yamaha PW50 Owner's Manual

Periodic maintenance and adjustment

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Remove the seat. (See page 4-8.)
3. Remove the muffler bolt and
washers. WARNING! Always let
the exhaust system cool prior to
touching exhaust components.
[EWA14582]
4. Slide the spring clamp down, and
then remove the muffler.
1. Muffler
2. Washer
3. Muffler bolt
4. Spring clamp
5. Remove the exhaust chamber bolt
and washers.
EAU25081
EAU56822
EWA10822
1. Exhaust chamber
2. Exhaust chamber bolt
3. Washer
6. Remove the exhaust manifold
4
1. Exhaust manifold bolt
7. Remove the right-side rear shock
1 2 3
1. Rear shock absorber mounting bolt
7-24
bolts, and then remove the ex-
haust chamber, the power reduc-
tion plate and the gasket.
absorber mounting bolt and then
tilt the rear shock absorber up-
ward as shown.
1
2
3
7
1
1