Canon MX720 Series Online Manual page 39

Displays the list of numbers dialed with the Numeric buttons to redial the selected number. You
can also use this button to enter pause time between or after numbers when dialing for example
international calls.
(6) Stop button
Cancels operation when print, copy, scan, or fax transmission/reception job is in progress.
(7) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
(8) Black button
Starts black & white copying, scanning, faxing, etc.
(9) Color button
Starts color printing, copying, scanning, faxing, etc.
(10) Coded Dial button
Displays the coded speed dial list or telephone number search list on the coded speed dial
screen. You can dial a recipient from the list.
(11) Hook button
Enables you to dial using the Numeric buttons on the machine without picking up the handset.
This button is also used when using an information service, etc.
(12) Function buttons
Used to select a function menu displayed at the bottom of the LCD.
Using the Function Buttons
(13) MENU button
Displays the menu which provides access to photo print or various copy functions. With this
menu, you can perform machine maintenance and change machine settings.
When Printing Becomes Faint or Colors Are Incorrect
Changing the Machine Settings on the LCD
You can also configure a wireless LAN connection.
LAN settings
(14) SCAN button
Switches the machine to the scan mode. You can save/forward scanned data to your computer or
save them on a USB flash drive, with the operation panel.
(15) FAX Memory lamp
Lights when there are received or unsent documents stored in the machine's memory.
(16) + - buttons
Specifies the number of copies to copy or print. Holding down a button moves forward or
backward through the photo display, or increases or decreases the number of copies in units of
10.
(17) Back button
Returns the LCD to the previous screen.
(18) OK button
Finalizes the selection of a menu or setting item.
Resolves an error when printing is in progress, resumes the machine's normal operation after
removing jammed paper, or ejects documents remaining in the ADF (Auto Document Feeder).
(19) , , , and
Used to select a menu or setting item, and also used to enter characters.
LCD and Operation Panel
(20) Tone button
Switches to tone dialing temporarily if your machine is connected to a rotary pulse line and
changes the input mode for entering characters. This button is also used to dial with the Numeric
buttons.
(21) Numeric buttons
Used to enter fax/telephone numbers and characters.
Note
The machine makes the beep sound when pressing buttons on the operation panel. The sound
volume can be adjusted in Sound control of Device user settings.
buttons