Yamaha MT07 Owner's Manual page 24

Instrument and control functions
Multi-function display
1
3
1. Multi-function display
The multi-function display is equipped
with the following:
 odometer
 two tripmeters
 fuel reserve tripmeter
 instantaneous fuel consumption
 average fuel consumption
 coolant temperature
 air temperature
 self-diagnosis mode
 brightness control mode
Navigating the multi-function dis-
play
Push the left set button to change the
display between the odometer "ODO",
tripmeters "TRIP 1" and "TRIP 2", in-
stantaneous fuel consumption "km/L"
or "L/100 km", average fuel consump-
tion "AVE_ _._ km/L" or "AVE_ _._
L/100 km", coolant temperature "_ _
°C", and air temperature "Air_ _ °C" in
the following order:
ODO → TRIP 1 → TRIP 2 → km/L or
L/100 km → AVE_ _._ km/L or AVE_ _._
L/100 km → _ _ °C → Air_ _ °C → ODO
For the UK:
Push the left set button to change the
display between the odometer "ODO",
tripmeters "TRIP 1" and "TRIP 2", in-
stantaneous fuel consumption "km/L",
"L/100 km" or "MPG", average fuel
consumption "AVE_ _._ km/L", "AVE_
_._ L/100 km" or "AVE_ _._ MPG",
coolant temperature "_ _ °C", and air
temperature "Air_ _ °C" in the following
order:
ODO → TRIP 1 → TRIP 2 → km/L,
L/100 km or MPG → AVE_ _._ km/L,
AVE_ _._ L/100 km or AVE_ _._ MPG →
_ _ °C → Air_ _ °C → ODO
3-9
TIP
 Push the right set button to chan-
ge the display in the reverse order.
 The fuel reserve tripmeter and the
self-diagnosis mode come on au-
tomatically, while the brightness
control mode is accessed sepa-
rately.
Odometer and tripmeters
The odometer shows the total distance
traveled by the vehicle.
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, use the left set
button to display the tripmeter you
want to reset, and then push the right
set button for one second.
TIP
 The odometer will lock at 999999
and cannot be reset.
 The tripmeters will lock at 9999.9
but can be manually reset.