Using Adaptive Cruise Control - Ford 2017 EXPLORER Owner's Manual

Switching Cruise Control Off
Press and release OFF when the system
is in stand by mode or switch the ignition
off.
Note: You erase the set speed when you
switch the system off.
USING ADAPTIVE CRUISE
CONTROL
(If Equipped)
WARNINGS
Always pay close attention to
changing road conditions when using
adaptive cruise control. The system
does not replace attentive driving. Failing
to pay attention to the road may result in
a crash, serious injury or death.
Adaptive cruise control is not a crash
warning or avoidance system.
Adaptive cruise control does not
detect stationary or slow moving
vehicles below 6 mph (10 km/h).
Adaptive cruise control does not
detect pedestrians or objects in the
road.
Adaptive cruise control does not
detect oncoming vehicles in the
same lane.
Do not use adaptive cruise control
on winding roads, in heavy traffic or
when the road surface is slippery.
This could result in loss of vehicle control,
serious injury or death.
Do not use adaptive cruise control
when towing a trailer that has trailer
brakes. The auto-brake component
of the adaptive cruise control system does
not operate the trailer brakes. Using
adaptive cruise control when towing a
trailer that has trailer brakes may result in
the loss of vehicle control, which could
result in serious injury.
Explorer (TUB) Canada/United States of America, enUSA, Edition date: 03/2016, First Printing
Cruise Control
system. Failure to do so may result in a loss
of vehicle control, which could result in
serious injury.
The system adjusts your vehicle speed to
maintain the set gap between you and the
vehicle in front of you in the same lane.
E200996
The adaptive cruise controls are on the
steering wheel.
Switching Adaptive Cruise Control
On
Press and release ON.
E144529
E164805
The current gap setting and SET will also
appear.
210
WARNINGS
Do not use tire sizes other than those
recommended because this can
affect the normal operation of the
The indicator appears in the
information display.