Seats - Yamaha DRAG STAR XVS1100A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seats

Passenger seat
To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.
3
1. Nut
2. Washer
To install the passenger seat
1. Insert the projection on the front of
the passenger seat into the holder
as shown and place the seat in the
original position.
2. Install the washer and nut, and
then tighten the nut to the specified
torque.
EAU14201
Tightening torque:
Passenger seat nut:
21 Nm (2.1 m·kgf, 15 ft·lbf)
1. Projection
2. Seat holder
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolt, and then pull the
rider seat up.
3-12
1. Bolt
To install the rider seat
1. Insert the projections on the front
of the rider seat into the holders as
shown, place the seat in the origi-
nal position, and then install the
bolt.
1. Projection
2. Seat holder