Installing A Wheel - Yamaha GRIZZLY 350 Owner's Manual

EBU25701

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
NOTE:
G
The arrow mark on the tire must point toward
the rotating direction of the wheel.
G
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
1. Arrow mark
1. Tapered nut
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
8-39
8