Adjusting The Drive Select Lever Safety System Cable; Checking The Front Brake Pads And Rear Brake Shoes - Yamaha GRIZZLY 350 Owner's Manual

EBU24070
Adjusting the drive select lever safety
system cable
The drive select lever safety system cable stretch-
es with use, which can result in improper function.
Therefore, the safety system cable should be
checked and adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
EBU24120
Checking the front brake pads and rear
brake shoes
The front brake pads and the rear brake shoes
must be checked for wear at the intervals specified
in the periodic maintenance and lubrication chart.
8
EBU24171
Front brake pads
Check each front brake pad for damage and mea-
sure the lining thickness. If a brake pad is dam-
aged or if the lining thickness is less than 1.0 mm
(0.04 in), have a Yamaha dealer replace the brake
pads as a set.
1. Brake pad
2. Lining thickness
NOTE:
The wheels need to be removed to check the
brake pads. (See page 8-38.)
EBU24180
Rear brake shoes
The rear brake is provided with a wear indicator,
which allows you to check the brake shoe wear
without having to disassemble the brake. To check
the brake shoe wear, check the position of the
wear indicator while applying the brake. If a brake
8-26