V-Belt Cooling Duct Check Hose; V-Belt Case Drain Plug; Adjusting The Carburetor - Yamaha GRIZZLY 350 Owner's Manual

will affect carburetor jetting with subsequent
poor performance and possible engine over-
heating.
EBU23920

V-belt cooling duct check hose

If dust or water collects in the V-belt cooling duct
check hose, remove the hose and clean it.
1. V-belt cooling duct check hose (left front side of ATV)
EBU23930

V-belt case drain plug

After riding in water deep enough to allow it to en-
ter the V-belt case, remove this plug to drain the
water from the case.
NOTE:
If water drains from the V-belt case after removing
the plug, have a Yamaha dealer check the ATV as
the water may affect other engine parts.
1. V-belt case drain plug
EBU23940

Adjusting the carburetor

The carburetor should be checked and, if neces-
sary, adjusted at the intervals specified in the peri-
odic maintenance and lubrication chart. The
carburetor is an important part of the engine and
requires very sophisticated adjustment. Therefore,
most carburetor adjustments should be left to a
Yamaha dealer, who has the necessary profes-
8-23
8