Yamaha GRIZZLY 350 Owner's Manual page 88

NOTE:
An oil filter wrench is available at a nearby Yamaha
dealer.
6. Apply a thin coat of engine oil to the O-ring of
the new oil filter cartridge.
NOTE:
Make sure that the O-ring is properly seated.
8
1. O-ring
7. Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
8. Install the engine oil drain bolt, and then tight-
en it to the specified torque.
Tightening torque:
Engine oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
9. Refill with the specified amount of the recom-
mended engine oil, and then install and tight-
en the engine oil filler cap.
8-14