Toro 71209 Operator's Manual page 41

Problem
The blade does not rotate.
The tractor does not drive.
The cutting height is
uneven.
Possible Cause
1. The blade drive belt is
worn, loose, or broken.
2. The blade drive belt is off
of the pulley.
1. The traction belt is worn,
loose, or broken.
2. The traction belt is off
the pulley.
3. The transmission does
not shift.
1. The tire pressure is
incorrect.
2. The mower is not level.
3. The underside of the
mower is dirty.
41
Corrective Action
1. Install a new blade drive
belt.
2. Install the blade drive
belt and check the idler
pulley and belt guides
for the correct position.
1. Contact an Authorized
Service Dealer.
2. Contact an Authorized
Service Dealer.
3. Contact an Authorized
Service Dealer.
1. Set the tire pressure.
2. Level the mower from
side to side and from
front to rear.
3. Clean the underside of
the mower.