Toro 71209 Operator's Manual page 17

Setting the KeyChoice® Switch to
Operate in Reverse
The interlock feature on the tractor prevents the
power take-off (PTO) from operating when you
back up the tractor. If you shift the ground speed
lever into Reverse with the PTO engaged (i.e., with
the mower blades or other attachment running),
the engine will stop. Do not mow in reverse
unless it is absolutely necessary.
If you need to use the PTO while backing up,
turn off the interlock feature using the KeyChoice
switch located near the seat bracket (Figure 15).
Figure 15
1. KeyChoice switch
You could back over a child or bystander
while the mower blade or other attachment
is engaged and cause serious injury or death.
• Do not mow in reverse unless it is
absolutely necessary.
• Do not insert the KeyChoice key unless
it is absolutely necessary.
• Always look backward and down before
backing up the tractor.
• Use the KeyChoice switch only if you
are certain that no children or other
bystanders will enter the mowing area.
• Be very observant after deactivating
the interlock because the sound of the
engine may prevent you from noticing
that a child or bystander has entered the
work area.
• Always remove both the ignition and
KeyChoice keys and put them in a safe
place out of the reach of children or
unauthorized users when you leave the
tractor unattended.
1. Engage the blade (PTO).
2. Insert the KeyChoice key into the switch
(Figure 15).
3. Turn the KeyChoice key.
Note: A red light on the front console
(Figure 16) turns on, indicating that the
interlock is disabled.
Figure 16
1. Operating-in-reverse light
17