Tot Penalty; Tone Burst Tones - Alinco DR-735T/E Instruction Manual

Set mode menu
When transmission is shut down in the TOT mode, this function prohibits another transmission
during a selected TOT penalty period regardless of the PTT key being pressed. A beep
sounds when the PTT key is pressed during the TOT penalty period.
1. Press and hold FUNC key to enter the set
mode. Press dial to select menu 24.
Factory default setting is [OFF].
2. Rotate the right dial to select a value in
second as shown below. This setting
becomes effective regardless of bands
and VFOs.
3. Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
This is to access Tone burst repeaters which requires a certain pitch of audible tone to
activate "sleeping" repeaters. Usually, a repeater system does not require the tone once the
repeater is activated.
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 25. Factory default setting is [1750].
2. Rotate the right dial to select a value in
Hz as shown below. This setting becomes
effective regardless of bands and VFOs.
Alert is not a TB tone, but an intermittent
tone you may use to attract attentions of
your calling station.
3. Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
50
During the setting time of 5 seconds