Download Print this page

Obtaining Technical Assistance; Technical Specifications - Dell MD1400 Getting Started Manual

Hide thumbs Also See for MD1400:

Advertisement

Rack
Describes how to install your system into a rack. This document is shipped with
Installation
your rack solution.
Instructions
Deployment
Provides information about cabling your system and the installation and initial
Guide
configuration of your system. This document is available online at dell.com/
support/manuals.
NOTE: Always check for updates on dell.com/support/manuals and read the updates first because
they often supersede information in other documents.
NOTE: When upgrading your system, it is recommended that you download and install the latest
BIOS, drivers, and systems management firmware on your system from dell.com/support.

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not perform as expected, see
your system Owner's Manual. Dell offers comprehensive hardware training and certification. See
dell.com/training for more information. This service may not be offered in all locations.

Technical Specifications

NOTE: The following specifications are only those required by law to ship with your system. For a
complete and current listing of the specifications for your system, go to dell.com/support.
Power
AC Power Supply (per power supply)
Wattage
Heat dissipation
NOTE: Heat dissipation is calculated
using the power supply wattage
rating.
Voltage
NOTE: This system is also designed
to be connected to IT power systems
with a phase to phase voltage not
exceeding 230 V.
DC Power Supply (per power supply)
Wattage
Heat dissipation
NOTE: Heat dissipation is calculated
using the power supply wattage
rating.
Voltage
6
600 W
2047 BTU/hr (redundant, 600 W power supply)
100–240 V AC, autoranging, 50/60 Hz
700 W
2388 BTU/hr (redundant, 700 W power supply)
–(48–60) V DC

Advertisement

loading