Sound Pressure Level; Sound Power Level; Vibration Level - Toro 71241 Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

Safety

change into neutral and set the parking

brake;

stop the engine and remove the key.

Disengage drive to attachments, stop the engine,

and disconnect the spark plug wire(s) or remove

the ignition key

before clearing blockages or unclogging

chute;

before checking, cleaning or working on the

lawnmower;

after striking a foreign object. Inspect the

lawnmower for damage and make repairs

before restarting and operating the

equipment;

if the machine starts to vibrate abnormally

(check immediately).

Disengage drive to attachments when

transporting or not in use.

Stop the engine and disengage drive to

attachment

before refuelling;

before removing the grass catcher;

before making height adjustment unless

adjustment can be made from the operator's

position.

Reduce the throttle setting during engine run-out

and, if the engine is provided with a shut-off

valve, turn the fuel off at the conclusion of

mowing.

Maintenance and Storage

Keep all nuts, bolts and screws tight to be sure

the equipment is in safe working condition.

Never store the equipment with petrol in the tank

inside a building where fumes can reach an open

flame or spark.

Allow the engine to cool before storing in any

enclosure.

To reduce the fire hazard, keep the engine,

silencer, battery compartment and petrol storage

area free of grass, leaves, or excessive grease.

Check the grass catcher frequently for wear or

deterioration.

Replace worn or damaged parts for safety.

If the fuel tank has to be drained, this should be

done outdoors.

On multi-bladed machines, take care as rotating

one blade can cause other blades to rotate.

When machine is to be parked, stored or left

unattended, lower the cutting means unless a

positive mechanical lock is used.