Table of Contents
Advertisement
Operation
Fire hazard.
Do not leave the hob unattended
whilst it is being used.
Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.
Switching on
Touch the sensor.
will appear in each of the cooking
zone displays and will appear in the
timer display. If there is no further input,
the hob will switch itself off after a few
seconds for safety reasons.
Selecting/changing the power
level
Touch the sensor for the cooking
zone you want briefly.
will flash alternately with the selected
power level in the cooking zone display.
Touch the appropriate number sensor
for the power level you want.
The power level selected will flash in
the display for a few seconds to start
with and then light up constantly.
Switching off
To switch a cooking zone off, touch
the sensor for the cooking zone you
want twice.
To switch off the hob and all the
cooking zones, touch the sensor.
Residual heat indicator
If the cooking zone is still hot, the resid‐
ual heat indicator will light up after it
has been switched off.
26
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
The residual heat indicators will flash
in the event of a power cut either dur‐
ing operation or whilst there is still
danger from residual heat.
Danger of burning. Do not touch
the cooking zones whilst the residual
heat indicators are lit up.
Advertisement
Table of Contents
