Maintenance; Recommended Maintenance Schedule - Toro 74199 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
Each Use
Every 5 Hours
Every 25 Hours
Every 100 Hours
Every 200 Hours
Every 600 Hours or at
Storage
Before Storage
1
More often in dusty, dirty conditions
Important
Refer to your engine operator's manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug(s) before you do
any maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
Check the engine oil level.
Check the safety system.
Clean the cooling system.
Clean the mower housing.
Check the air cleaner.
Check the cutting blades.
Grease all lubrication points.
Oil the linkage bushings.
Check the belts for wear/cracks.
Check the battery electrolyte.
Check the tire pressure.
1
Change the engine oil.
Inspect the paper element of the heavy duty air cleaner.
1
Change the oil filter.
Replace the fuel filter.
Check the spark plug(s).
Replace the paper element of the heavy duty air cleaner.
Replace safety air cleaner
Perform all maintenance procedures listed above before storage.
Drain the fuel tank.
Charge the battery and disconnect the battery cables.
Paint any chipped surfaces.
Caution
26
1
1
1
1
1
1