Dab+ Display Information - DIGITAL RADIO MAGICBOX Manual

�� Use the or button on the front of the radio to scroll to
the Preset location and station that you would like to listen to
(1 - 10)�� Press the 'Enter' button�� The radio will instantly tune
to that station and begin to play��
Note: If no DAB+ station has been stored under the preset
button, 'Preset X empty' will be displayed, where 'X' is the
number of the preset location, then the radio will revert to
the previously selected radio station after a few seconds��

DAB+ display information

When listening to a DAB+ station you can change the
information that will appear on the second line of the
display�� There are seven different types of information that
are sent by the broadcaster��
Dynamic Label Segment (DLS) - this is scrolling text
information supplied by the broadcaster�� Information could
be the name of an artist or music title, DJ's name, contact
details for the radio station etc��
Signal Strength - An empty
of the display to indicate the minimum signal strength for
acceptable listening�� The row of solid rectangles indicate the
actual signal strength that you are receiving�� The stronger
the signal, the further to the right the row of solid rectangles
will be��
Program Type (PTY) - such as 'Rock' , 'Pop' , Talk' or 'News'
will appear on the second line
Multiplex Name - displays the broadcasting area and
collection of radio stations on this frequency e��g��:
BBC National DAB+, Digital 1 Network��
Channel and Frequency - e��g��: 1B 5��648 MHz
Signal error - This is displayed as a number between 0-99�� It
would not be possible to satisfactorily listen to a ratio station
with a signal error rate of 30 or above�� Try adjusting the aerial
or relocating your radio to improve reception��
Time and date - supplied by the broadcaster��
1�� Repeatedly press the 'Info' button on the front of the radio to
cycle through the different information options��
8