Product Set Up
Where to put your radio
It is important that you consider carefully in advance where
your radio will be situated and make sure that it is:
* on a flat and stable surface
* within 1��5 metres of a power socket
* where you can fully extend the telescopic aerial
* away from bright sunlight or heat sources, such as a radiator
* not in a humid or very damp place such as a bathroom
Setting up
Step 1: Connect the mains power lead into the socket on
back of the radio and fully extend the aerial in a vertical
position to obtain the maximum signal strength��
Note: Only use the power supply provided�� Using an
unauthorised power supply will invalidate your guarantee
and may damage your radio��
Step 2: Plug the power adaptor into the mains power wall
socket and switch on��
Step 3: When switching on for the first time, slide the power
switch on the back of the radio, to 'On' �� 'Welcome to Digital
Radio' will be displayed and your radio will automatically
begin to scan for DAB+ radio stations�� A progress bar will
show the progress of the scan and the number of stations
found during the scan will also be displayed��
When the scan is complete your radio will select the first
available station and begin to play�� Stations are listed in
numerical and then alphabetical order by default��
Note: The DAB+ radio station list is stored in the memory
and so the next time you switch your radio on, the station
search does not take place�� It is possible to scan manually for
stations�� Please see page 6��
Step 4: Inserting the batteries (optional)�� Before installing
the batteries (not included) please ensure that the DAB+
Radio is unplugged from the mains power supply��
On the back of the radio, push in the tab to remove the
battery compartment�� Insert 4 x AA batteries, making sure
to note the '+' and '-' markings and position the batteries the
correct way around�� Replace the battery cover, making sure
it 'clicks' shut��
3