Tune To An Fm Preset Station; Storing An Fm Station Preset - DIGITAL RADIO MAGICBOX Manual

�� Use the or button to scroll to Strong Stations or All
Stations and press the 'Enter' button to select��

Storing an FM station preset

Your radio can store up to 10 FM stations in its preset
memories for instant access to your favourite stations��
Note: When you store FM radio station presets, these do not
overwrite your DAB+ station presets��
1�� Tune your radio to the station that you wish to preset (see
Tuning to an FM station on this page)��
�� Press and hold the 'Preset' button on the front of your radio��
'Preset Store 1 Empty' is displayed if no previous station has
been stored��
3�� Use the or button on the front of the radio to scroll
to the Preset location that you would like to store the radio
station to (1 - 10)��
4�� Press the 'Enter' button, the display will confirm 'Preset X
stored' , where'X' is the number of the preset (1-10)��
Note: If there is already an existing FM station stored under a
preset, it will be over written when you store the new station��

Tune to an FM preset station

In FM mode:
1�� Press the 'Preset' button�� 'Preset Recall 1' is displayed and the
name or frequency of the station stored there, or 'Empty' if no
previous station has been stored��
�� Use the or button on the front of the radio to scroll to
the Preset location and station that you would like to listen to
(1 - 10)�� Press the 'Enter' button�� The radio will instantly tune
to that station and begin to play��
Note: If no FM station has been stored under the preset
button, 'Preset X empty' will be displayed, where 'X' is the
number of the preset location, then the radio will revert to
the previously selected radio station after a few seconds��
11