Toro 03678 Operator's Manual page 22

InfoCenter Icon Description (cont'd.)
Glow plugs are active
Raise cutting units
Lower cutting units
Operator must sit in seat
Parking Brake Indicator—indicates
when the parking brake is On
Identifies the range as High
(Transport)
Neutral
Identifies the range as Low (Mow)
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
PTO is engaged
Denied or not allowed
Engine Start
Stop or shutdown
Engine
Key switch
Indicates when the cutting units are
being lowered
Indicates when the cutting units are
being raised
PIN passcode
CAN bus
InfoCenter
Bad or failed
InfoCenter Icon Description (cont'd.)
Symbols are often
combined to form
sentences. Some
examples are shown
below
Using the Menus
To access the InfoCenter menu system, press the menu access
button while at the main screen. This will bring you to the
main menu. Refer to the following tables for a synopsis of
the options available from the menus:
Main Menu
Menu Item
F
AULTS
S
ERVICE
22
Bulb
Output of TEC controller or control
wire in harness
Switch
Operator must release switch
Operator should change to indicated
state
Operator should put machine in
neutral
Engine start denied
Engine shutdown
Engine coolant too hot
Sit down or set parking brake
Description
The F menu contains
AULTS
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the F
menu and the information
contained there.
The S menu contains
ERVICE
information on the machine
such as hours of use, counters,
and other similar numbers.
AULTS