Toro 78395 Operator's Manual page 7

1
Figure 10
Left Side of Tractor Shown
1. J-pin
5. On the left side, pull out the attachment lift J-pin and
slide it into the slot on the other mower mounting
bracket.
6. After the two J-pins are seated through the mower
mounting brackets, using the attachment lift and your
hand on the right front adjustable mower wheel bracket
(Fig. 11), position the mower so its attachment bar fits
into the mid Attach-A-Matic
Caution
Movement of the attachment lift between the
mower mounting brackets and the attachment lift
arms can injure a person when aligning the mower
with the lift arms.
Keep hands away from moving parts while
operating the attachment lift.
Always position the mower with your hand on
the right front mower wheel bracket.
Never try to position the mower with your
hands on the mower mounting brackets or
below the mower housing.
2
m–3456
2. Mower slot in side
mounting bracket.
mount.
Figure 11
7. Turn the lever of the Attach-A-Matic
counterclockwise to lock the mower to the tractor
(Fig. 12).
1
Figure 12
1. Attach-A-Matic button
2. Attach-A-Matic lever
8. Raise the rear center wheel on the mower so that it will
not interfere with mowing, using the following
procedure:
Important Always raise the rear center wheel before
mowing. The mower may become damaged if the wheel is
left in the down position while mowing.
A. Remove the hairpin cotter from the wheel rod
(Fig. 13).
7
m–3575
3
2
m–3611
3. Lock