Table of Contents
Advertisement
Figure 24
1. PTO pulley
11. Replace the grill.
12. Press the button of the mid Attach-A-Matic
the lever clockwise to release the mower (Fig. 25).
1
Figure 25
1. Mid Attach-A-Matic
button
13. Pull the two spring loaded J-pins from the deck lift arms
and twist them slightly so that they stay disengaged
(Fig. 26).
1
m–3454
and twist
2
m–3457
2. Mid Attach-A-Matic
lever
13
1
Figure 26
1. J-pin
14. If you wish to remove the pulley box, push the latch
release buttons on the front Attach-A-Matic
and raise the latch levers to open the latches holding the
pulley box. Remove the pulley box.
1
Figure 27
1. Front Attach–A–Matic
button (one on each side)
2. Front Attach–A–Matic
latches
15. Start the tractor and raise the attachment lift to provide
ample clearance to slide out the mower.
16. Turn the steering wheel all the way to the left.
17. Stop the engine and remove the ignition key.
18. Slide the mower out from the right side of the tractor.
Note: Turn the steering wheel as needed to remove the
mower.
19. Replace the grill.
m–3456
(Fig. 27)
2
2
3
m–5511
3. Pulley box
Advertisement
Table of Contents
