Unfolding The Handle - Toro 20793 Operator's Manual

Setup
Important: Remove and discard the protective plastic
sheet that covers the engine.

Unfolding the Handle

Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
S
Do not damage the cables when folding or
unfolding the handle.
S
If a cable is damaged, contact an Authorized
Service Dealer.
1. Install the blade control bar into the upper handle.
2. Carefully move the upper handle forward until the
handle halves are in line and nest together.
A.
m-8108
B.
6
3. Tighten the
upper handle
knobs as tight as
you can.
4. Rotate the handle rearward.
A.
B.
m-8233
5. Attach the handle
brackets (A) to the lower
handle sides.
Note: Insert a lock
washer between
each bracket and
knob, and tighten the
lower handle knob as
tight as you can by
hand.
m-8109
3353-459 Rev A
m-8095
m-8110
A
m-8097
m-8109