Operation; Starting The Engine - Toro 20793 Operator's Manual

Operation

Starting the Engine

Model 20793 only
1. Push the
ignition toggle
switch to the On
("I") position.
2. Firmly push in
the primer 3 times
with your thumb,
holding the primer
in for a second
before releasing it
each time.
Note: If the air
temperature is
°
below 13 C, firmly
push the primer in
5 times.
3. Pull the recoil
starter in the
operating position.
4. If the mower does not start in 1 or 2 pulls, press
the primer button 1 or 2 times and try starting it again.
Note: If the mower still does not start, contact an
Authorized Service Dealer.
10
Starting the Engine
Model 20795 only
1. Firmly push in
the primer 3 times
with your thumb,
holding the primer
in for a second
before releasing it
each time.
Note: If the air
temperature is
°
below 13 C, firmly
push the primer in
5 times.
m-8203
2. Start the engine in one of two ways:
• Turn the
ignition key to
the Start
position; when
the engine
starts, release
the key.
Turn the
•
m-7311
ignition key to
the Run
position and
pull the recoil
starter in the
operating
position.
m-8208
3. If the mower does not start in 1 or 2 pulls (or
within 5 seconds using the electric starter), press the
primer button 1 or 2 times and try starting it again.
Note: If the mower still does not start, contact an
Authorized Service Dealer.
3353-459 Rev A
m-7311
m-5592a
m-4268
A.
m-5592a
m-4268
B.
m-8208