Recommended Maintenance Schedule(S); Preparing For Maintenance - Toro 29639 Operator's Manual

50 cm mulching/rear bagging
Hide thumbs Also See for 29639:
Table of Contents

Advertisement

Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
Every 100 hours
Before storage
Yearly

Preparing for Maintenance

1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the spark plug wire from the spark plug
(Figure 19) before performing any maintenance
procedure.
Figure 19
1. Spark plug wire
3. After performing the maintenance procedure(s),
connect the spark plug wire to the spark plug.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Ensure that the engine stops within 3 seconds after releasing the blade control bar.
• Clean grass clippings and dirt from under the mower.
• Check the spark plug and replace it if necessary.
• Empty the fuel tank before repairs as directed and before annual storage.
• Clean the cooling system; remove grass clippings, debris, or dirt from the engine
air cooling fins and starter. Clean the system more frequently in dirty or high-chaff
conditions.
• Replace the air filter; replace it more frequently in dusty operating conditions.
• Change the engine oil.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
Tipping the mower may cause the fuel to leak.
Gasoline is flammable, explosive and can cause
personal injury.
Run the engine dry or remove the gasoline with
a hand pump; never siphon.
Important: Always tip the mower onto its side
with the dipstick down.
11

Advertisement

Table of Contents
loading

Table of Contents