Sound Pressure; Sound Power; Vibration, Hand/Arm - Toro 22200TE Operator's Manual

66 cm heavy-duty rear bagger
Hide thumbs Also See for 22200TE:
Table of Contents

Advertisement

• Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
• Replace worn or damaged parts for safety.
• Replace faulty silencers.
• If the fuel tank has to be drained, do this out-doors.
• Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.
• Be careful during adjustment of the machine to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
• To ensure the best performance and safety,
purchase only genuine Toro replacement parts
and accessories. Do not use will fit parts and
accessories; they may cause a safety hazard.

Sound Pressure

This machine has a maximum sound pressure level at the
operator's ear of 85 dBA, which includes an Uncertainty
Value (K) of 1 dBA. The sound pressure level was
determined according the procedures outlined in EN
836 and ISO 11201.

Sound Power

This machine has a guaranteed sound power level of 98
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 11094.

Vibration, Hand/arm

Measured vibration level for the left hand = 3.0 m/s
Measured vibration level for the right hand = 3.8 m/s
Uncertainty Value (K) = 1.9 m/s
The measured values were determined according to the
procedures outlined in EN 836.
2
2
2
5

Advertisement

Table of Contents
loading

Table of Contents