Table Of Contents; Introduction - Toro 22200TE Operator's Manual

66 cm heavy-duty rear bagger
Hide thumbs Also See for 22200TE:
Table of Contents

Advertisement

Introduction

This rotary-blade, walk-behind lawn mower is
intended to be used by residential homeowners
or professional, hired operators. It is designed
primarily for cutting grass on well-maintained lawns
on residential or commercial properties. It is not
designed for cutting brush or for agricultural uses.
Read this information carefully to learn how to operate
and maintain your machine properly and to avoid injury
and machine damage. You are responsible for operating
the machine properly and safely.
You may contact Toro directly at www.Toro.com for
machine and accessory information, help finding a
dealer, or to register your machine.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your machine ready. Figure 1
identifies the location of the model and serial numbers
on the machine. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
© 2010-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
General Safety ...................................................... 3
Sound Pressure..................................................... 5
Sound Power ........................................................ 5
Vibration, Hand/arm ........................................... 5
Safety and Instructional Decals ............................. 6
Setup............................................................................ 8
1 Installing the Handle.......................................... 8
2 Filling the Crankcase with Oil............................. 8
Product Overview ........................................................ 9
Controls ............................................................... 9
Operation................................................................... 10
Checking the Engine Oil Level............................ 10
Filling the Fuel Tank with Gasoline ..................... 11
Starting the Engine............................................. 12
Stopping the Engine ........................................... 12
Operating the Blade............................................ 13
Operating the Traction Drive.............................. 13
Checking the Blade Brake Clutch ........................ 14
Adjusting the Cutting Height .............................. 14
Using the Grass Bag ........................................... 15
Operating Tips ................................................... 15
Maintenance............................................................... 17
Lubrication............................................................. 18
Lubricating the Pivot Arms................................. 18
Lubricating the Gear Case................................... 18
Engine Maintenance............................................... 19
Servicing the Air Filter........................................ 19
Changing the Engine Oil .................................... 19
Changing the Oil Filter ....................................... 20
Servicing the Spark Plug ..................................... 20
Fuel System Maintenance ....................................... 21
Fuel Filter....................................................... 21
Drive System Maintenance ..................................... 21
Adjusting the Self-propel Drive........................... 21
Controls System Maintenance................................. 22
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved

Advertisement

Table of Contents
loading

Table of Contents