COIL ELEMENTS (on some models)
Make sure control knobs are off and elements are cool.
Do not clean or immerse in water. Soil will burn off when hot.
BURNER BOWLS (on some models)
Before removing or replacing coil elements and burner bowls,
make sure they are cool and the control knobs are in the OFF
Remove the coil element by pushing the edge of the coil element
toward the receptacle. Lift it enough to clear the burner bowl.
Pull the coil element straight away from the receptacle to
remove. Lift out the burner bowl.
Chrome burner bowls
Wash frequently in warm, soapy water. (It is not recommended
to wash chrome bowls in a dishwasher.) A mild abrasive cleaner
and a plastic scrubber can be used to remove stubborn stains.
For heavily soiled bowls, place an ammonia soaked paper towel
on the stains and allow to soak for a short time, then gently
scrub with a plastic scrubber.
SURFACE UNDER COOKTOP (on some models)
The coil cooktop will lift up to provide easy access for cleaning
beneath. Lift the cooktop by both front corners until the support
locks into place.
Glass cleaner, mild liquid cleaner, or nonabrasive scrubbing
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the "Accessories" section for more information.
To avoid damage to the range, do not remove the cooktop.
For racks that have discolored and are harder to slide,
a light coating of vegetable oil applied to the rack guides
will help them slide.
STORAGE DRAWER (on some models)
Check that storage drawer is cool and empty before cleaning.
Do not use oven cleaners on models with Self-Cleaning.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining,
etching, pitting or faint white spots can result.
See "Self-Cleaning Cycle" section.
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the OFF position.
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.