Channel Level - Pioneer DV-757AI Operating Instructions Manual

The Initial Settings Menu
3 Use the Joystick (up/down) to change
the distance.
• When you change the distance settings
of the front left (L) or front right (R)
speakers, all the other speaker dis-
tances change relative to it.
• Front left/right (L/R) speaker distances
can be set from 30 cm to 9 m in 10 cm.
increments.
• The center speaker (C) and subwoofer
(SW) can be set from –2 m to +2 m
relative to the front left/right speakers.
• Surround left/right (LS/RS) speakers can
be set from –6 m to +2 m relative to the
front left/right speakers.
4 Move the cursor left to go back to the
speaker list if you want to modify
another speaker, or press ENTER to exit
the Speaker Distance screen.
• Speaker Distance settings do not affect
SACD playback.

Channel Level

• Default setting: Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language Speaker Distance
Display Channel Level
Options
Speakers
i.LINK Setup
When set to Fix, the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
You can set the individual channel levels
between –6dB and +6dB in 0.5 dB incre-
ments using the test tone output as a guide
to set the correct levels. Adjust the levels
until the output level from all channels
sounds the same from your usual listening
position. Note that Audio Output Mode
(page 67) must be set to 5.1 Channel in
order to use the test tone.
Automatic: Select Auto to start the test
tone output.
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
Fix
Variable
ENTER to save the settings and exit the
channel level setting screen.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
C 0.0dB
R 0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speakers
SW 0.0dB
i.LINK Setup
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language 0.0dB
C
R 0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speakers
0.0dB
SW
i.LINK Setup
08
69
En