Download Print this page

Hoover TIF2600 User Manual page 7

Advertisement

Chapter 2.4 - Shot of Steam
Ensure that there is enough water in the water tank.
When the temperature dial is set to steam setting (between " " to "MAX") a shot of steam can be produced.
Press the steam boost button, the sole-plate will emit a strong flow of steam.
NOTE
Only use the steam boost button when the steam iron has reached the steam or maximum temperature.
Do not press the steam boost button more than 3 times repeatedly. For optimum steam output , leave an
interval of at least 5 seconds between pressing the steam boost button.
The steam boost button feature can be used with Dry or Steam ironing as desired.
aTTENTiON: Never direct the steam towards people. Burns or serious injury may occur.
Chapter 2.5 - Spraying
Ensure there is enough water in the water tank.
Press the spray button to produce a fine spray of water from the nozzle and continue ironing.
NOTE: Do not spray silk.
Chapter 2.6 - Vertical Shot Of Steam
When the temperature dial is set to a steam setting (between " " to "MAX") vertical steam can be used.
Simply hold the iron vertically, positioned in front with a slight distance from the item to be steamed, and
press the steam boost button.
aTTENTiON: Never direct the steam towards people. Burns or serious injury may occur.
NOTE: This is especially useful for getting wrinkles out of hanging clothes, curtains, wall hangings etc.
Chapter 2.7 - Automatic Anti-Calc Function
Your iron contains an anti-calc cartridge to reduce scale deposits. This considerably prolongs the operational
life of your iron.
The anti-calc cartridge is an integral part of the water tank and does not need to be replaced.
Chapter 2.8 - Automatic Anti-Drip Function
Your iron has an anti-drip function. The iron automatically stops generating steam when the temperature is
too low to prevent water from dripping out of the sole-plate.
NOTE: When using the steam function, your appliance may stop generating steam for several seconds, this is
normal.
Chapter 2.9 - Self-Clean Function
Use the self clean function once every two weeks. If the water in your area is very hard, the self clean function
should be used more frequently.
Make sure the iron is unplugged.
Set the steam control knob to OFF position.
Fill the water tank to the maximum level.
6 - GB

Advertisement

loading

This manual is also suitable for:

Tim2500