Operation - Belkin F1DN204M-3 User Manual

oPeraTIon

SECTIONS
Table of Contents
operation
self-Test Procedure
As product powers-up it performs a self-test procedure. In case of
self- test failure for any reason, including jammed buttons, the product
will be Inoperable. Self-test failure will be indicated by the following
abnormal LED behavior:
• All channel-select LEDs will be turned ON and then OFF;
• A specific, predefined LED combination will be turned ON;
• The predefined LED combination will indicate the problem type
(jammed buttons, firmware integrity).
Try to power cycle product. If problem persists please contact your
system administrator or technical support.
Now that product, computers and peripherals are connected and
powered up, it is ready for use.
default Channel
After product boots up, the default active channel will be channel #1.
This will be indicated by white color illumination of push-button #1.
Product Mapping to sources
Product mapping to sources is indicated by stickers/labels specifying
which channel is mapped to which computer.
Belkin Advanced Secure Windowing KVM User Manual
®
1 2
front Panel Push-buttons
Following power up, the default channel is #1.
The user can select any other channel by pressing the appropriate front
panel push button.
The mouse cursor will be positioned at the center of the selected
The currently selected channel is indicated by white color illumination of
the appropriate push-button.
Once a different channel is selected – video, keyboard, mouse, audio
follow selected channel. CAC behavior is described above.
26
3 4 5 6