Troubleshooting; Transportation And Storage; Disposal - Timberk THU ADF 01 Instruction Manual

IMPORTANT!
To avoid deformation and abrasion of working surface
leading to reduction of pulverization rate or other
malfunctions, do not use metal brushes, blades, or
talc powder for wiping of the pulverizer surface.
If a water leak appears, immediately stop the device
and contact a service center.
To keep the appliance dry, remove water after cleaning
and certainly dry the water tank and device housing.
Make sure that there are no water remains inside the
water tank and device housing.
Before a long pause in use of the appliance, dry the
tank and device surfaces, pack the humidifier to a
plastic bag and then to a box.
Store the appliance in a room with low humidity.
Storage of the device in undried condition results in
formation of mold.

9. TROUBLESHOOTING

In case of emergency situations, refer to the troubleshooting information
given in Table 2. If you cannot resolve problems with the indicated methods,
please contact a service center of the manufacturer.
Table 2
Malfunction Possible cause
The power plug is poorly inserted to
No pulverization.
the wall outlet.
1. Lime deposits formed on the
White bloom (salts precipitated from
membrane.
water) appeared on objects around
2. Used water contains a great quantity
the humidifier.
of salts (calcium and magnesium).
1. Tainted water is used.
2. Remains of tainted water or debris
Steam has unacceptable odor.
accumulated in the appliance housing
or pulverizer.

10. TRANSPORTATION AND STORAGE

1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit's package must be strictly observed when
transporting and storing it.
3. Temperature
requirements*
Humidity
requirements*
We are researching new technologies and constantly improving the quality
of our products. Specifications, design and scope of delivery may be
changed without any prior notice.
* Products must be stored in dry, ventilated storages at the temperature not lower than -30°C.
The humidifier's life is 2 years. At the end of life, the humidifier must be
disposed in accordance with regulations, rules and method, effective in
the disposal area.
Remedy
Carefully insert the power plug to the
wall outlet.
1. Clean the humidifier membrane with
the special brush.
2. Use filtered water.
Clean the device according to the
cleaning/maintenance instructions and
fill the tank with fresh water.
-30°C to +50°C
Transportation and
storage
15% to 85%
(no condensate)

11. DISPOSAL

www.timberk.com • electric humidifier
7