Eco Settings - Philips 40PFK6580 User Manual

Immersion
With Immersion, you can adjust how accurate the
Hue bulbs follow the Ambilight.
To adjust Ambilight+hue immersion...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Immersion, and
press OK.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
View Configuration
With View Configuration, you can view current setup
of the Ambilight+hue, network, the Bridge and bulbs.
To view Ambilight+hue configuration...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > View Configuration,
and press OK.
4 - Select Off, then press OK.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Reset Configuration
To reset Ambilight+hue...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Reset Configuration,
and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
23.4

Eco Settings

Energy Saving

Eco settings bundles the settings that help the
environment.
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture.
To set the TV in Energy Saving...
1 - Press  , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Energy Saving, the Picture Style is set to
Standard automatically.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Screen Off
If you only listen to music, you can switch off the TV
screen to save energy.
To only switch off the TV screen...
1 - Press  , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Screen Off.
4 - Press  (left) repeatedly if necessary, to close
the menu.
To switch the screen back on, press any key on the
remote control.
Light Sensor
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, together with
Ambilight, to the lighting conditions of the room.
To activate the light sensor...
1 - Press  , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Light Sensor. The icon  is shown in
front of Light Sensor when it is active.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1 - Press  , select All Settings and press OK.
79